Machine Data Plate; Commencing Operation; Instructions For Electrical Connection - Kunzle & Tasin Bona Dual Edge Manuel D'utilisation

Introduction (Cont.)

Machine data plate

1) Machine model
2) Safety symbols
3) Motor power
4) Frequency
5) Supply voltage
6) Country of manufacture
7) Year of manufacture (see 9)
8) Name of the manufacturer

Commencing Operation

Instructions for electrical connection

This machine only operates
with the voltage and frequency
shown on the machine data
plate. Before connecting the
cable to the power supply
ensure the correct voltage and
frequency
are available.
8
9) Serial number:
• T he first two numbers refer to the year of
manufacture (14 = 2014)
• The second group of three numbers indicates the
day of the year the machine was manufactured
(127 = May 7th)
• The last two numbers indicate the progressive
number of machines produced that day of
manufacture (13 = 13th machine produced that day)
DO NOT expose the machine
to rain. This machine is
intended for dry use only.
Keep the machine in a dry
building and DO NOT use it in
damp or wet places.
Bona Dual Edge Manual
If the machine is not
connected correctly to the
electricity network, death due
to electrocution may occur.
To prevent electric shocks
always use a grounded three
wire electrical system. For
maximum protection against
electric shocks use a circuit
protected with a di erential
cut-out switch.