LG DLEX3250 Série Mode D'emploi page 17

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Reversing the door (cont.)
WArNiNg
w
• To avoid damage to the dryer or the door, support the
door with a stool or box that fits under the door, or have
an assistant support the weight of the door.
• Always reverse the door BEFORE stacking the dryer on top
of the washer.
• Avoid dropping the door to avoid damage to the door or
the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
1. Move the door to the left side and line up the holes in the
hinge with the holes in the cabinet.
CAuTiON
w
Be sure to support the weight of the door before removing the
hinge screws.
2. Hold the hinge in place while inserting the two hinge screws
(to prevent the door from dropping).
Hinge Screw
3. Insert the latch on the right side and install the latch screws.
4. Insert the two decorative screws on the right side.
5. Check that the door closes and latches properly.
Hinge hole
Latch
Screw
iNSTALLATiON iNSTruCTiONS
Decorative
Hinge
Screw
Swing Door
17

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dlgx3251 série

Table des Matières