Rotary Brush; Before Treatment; Starting Treatment - Weelko F331 Mode D'emploi

ROTARY BRUSH

Before treatment

1. Scrub the skin surface with a wet pad.
2. Using a steamer (or hot cloth) to soften the skin
surface in the treatment area.
3. After skin-cleansing maintenance, it is advisable to
daub some nutritional oil on the target skin surface.

Starting treatment

1. Choose the appropriate brush head according to the
customer's skin type. In general, delicate or dry skin
needs a soft brush head, while harder brushes can be
used for rough or greasy skin.
2. According to the needs, adjust rotation direction by
pressing "STATE", the output level by pressing
"ENERGY" and desired time of operation by pressing
"TIMER".
3. Press "START/PAUSE" to start working.
Cautions
•
Do not press the brush head excessively while it is
running.
•
Do not operate this instrument with any evident acid
or alkaline substance.
•
After the operation, turn the instrument off and
disconnect the power cord.
•
This function should not be used on customers who
suffer from hypersensitive skin or dermatitis.
•
If the capillary vessels in the skin are injured, do not
cleanse the skin with this function.