Display Modes; Initial Loading Sequence; Display Configuration; Display Setup Menu - LOREX Technology L15LD420 Série Manuel D'instructions

Display Modes

Initial Loading Sequence

• Connect the POWER cable located on the back of
the Observation System. The unit will automatically
power on.
• The System will load the firmware
• The System will perform a Hard Drive check.
• The unit will initially load to a split screen view,
displaying all 4 cameras (if available).
NOTE: If a new HARD DRIVE is detected, the system will
prompt you to FORMAT the drive. If you do not choose to
format the HARD DRIVE, the drive will not be detected by
the system.
If you choose to FORMAT a drive in this way, the drive will
no longer be readable by a regular PC without using the
HARD DRIVE VIEWER software included on the CD
provided with this unit.

Display Setup Menu

Display Configuration

• Right click the mouse button to display the
setup menu
• Right click mouse button again to hide the
setup menu.
Display Modes
19