Connecting To A Tv Using A Digital Optical Cable; Auto Power Link - Samsung HW-K850 Manuel D'utilisation

Masquer les pouces Voir aussi pour HW-K850:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONNECTIONS

COnneCting tO a tV USing a DigitaL OPtiCaL CaBLe

1. Connect the DigitaL aUDiO in (OPtiCaL) (audio) jack on the Soundbar to the oPTICaL oUT jack of the TV
with a digital optical cable (not supplied).
2. Press the
button on the right side of the Soundbar or the SOUrCe button on the remote control to select
the D.in mode.

+ auto Power Link

If you have connected the main unit to a TV with a digital optical cable, you can set the auto Power function on
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the
button on the main unit's right side or the SOUrCe button on the remote control to select the
D.in mode.
3. Press the Left button on the remote control for 5 seconds to turn auto Power Link on or off.
● auto Power Link is set to on by default.
● Depending on the connected device, auto Power Link may not function.
● This function is only available in the D.In mode.
Optical Cable
(not supplied)
OPTICAL OUT
DIGITAL AUDIO IN
(OPTICAL)
AUX IN
DIGITAL AUDIO IN
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
DC 19V
Wi-Fi SETUP
SPK ADD
HDMI IN 2
SERVICE
22
SOUND
SOURCE
SOUND
SOURCE

Publicité

Table des Matières
loading

Table des Matières