Connecting To A Tv Using A Digital Optical Cable; Auto Power Link - Samsung HW-J6000R Mode D'emploi

CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE

1. Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical
cable.
2. Press the button on the top panel of the Soundbar or the SOURCE button on the remote control to select
the D.IN mode.

+ Auto Power Link

If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON
to have the Soundbar turn on automatically when you turn the TV on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the button on the main unit's top panel or the SOURCE button on the remote control to select the
D.IN mode.
3. Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.
● Auto Power Link is set to ON by default.
● Depending on the connected device, Auto Power Link may not function.
Optical Cable
(not supplied)
OPTICAL OUT
OPTICAL IN
DC 14V HDMI IN
AUX IN
5V 0.5A
HDMI OUT
OPTICAL IN (TV-ARC)
21
CONNECTIONS