Chapter Ii Display; General Description - Thermo Scientific Orion Star Mode D'emploi

Chapter II

General Description

Throughout a given process, the display on an Orion Star or Star Plus series meter
provides temperature and calibration data . The temperature appears in the left, top
corner of the display . The
setup menu is active . The man, 2, 4, 7, 9, 10, and 12 icons indicate which pH
buffers were saved after a pH calibration is performed . The setup icon only appears
when the meter is in setup mode . The
when it is displayed with the
exists . The
and is discussed in greater detail in the Meter Setup section .
Temperature
Calibration
5 Star Meter
This is the display of the 5-Star meter capable of multi-parameter measurements .
The single and dual parameter meters will have fewer measurement lines,
depending on the meter capabilities .
Note: In the measurement mode, the three main lines of data on the meter
display correspond to what is being measured.
Thermo Scientific Orion Star
Display
icon indicates that a calibration mode or calibration
icon, a calibration alarm or sensor quality issue
icon indicates that the AUTO-READ measurement mode is active
and Star Plus Series Meter User Guide
™
icon indicates an error condition and
pH/ISE/ORP
Unit
Conductivity
Unit
DO Unit
EN-3