Chapter Xii Data Archiving And Retrieval; Datalog And Calibration Log; Automatic Datalog Feature - Thermo Scientific Orion Star Mode D'emploi

Chapter XII

Datalog and Calibration Log

All 3-Star Plus and the 4-Star Plus pH/ISE meters have a 1000 point datalog . The
4-Star Plus pH/conductivity and pH/dissolved oxygen meters have a 750 point
datalog . The 5-Star Plus meters have a 500 point datalog . The 2-Star meter has a
50 point datalog and all Orion Star meters have a 200 point datalog .
The Star Plus meter printouts have been enhanced to include additional information .
The pH and ISE calibration printouts now include the average slope, the slope
between points and the E
now include slope, membrane temperature and solution temperature .

Automatic Datalog Feature

The 3-Star, 4-Star and 5-Star Plus meters have been enhanced to include an
automatic datalog feature that can be turned on or off . To enable the automatic
recording of data into the datalog:
1 . In the measurement mode, press
2 . Press /
3 . Press to accept the selection and move the arrow icon to the middle line
and press
4 . Press to accept the selection and move the arrow icon to the bottom line
and press
5 . Press to accept the selection and move the arrow icon to the top line .
6 . Press to save the setup option and return to measurement mode .
Thermo Scientific Orion Star
Data Archiving and Retrieval
per point . The polarographic dissolved oxygen printouts
o
until is displayed on top line .
/ until
/ until is displayed .
and Star Plus Series Meter User Guide
™
.
is displayed .
EN-47