Troubleshooting - Exquisit TA 7101 pbl Mode D'emploi

delivered with a declaration of conformity for inspection by the market
monitoring authority. *Subject to change without notice*

16 Troubleshooting

Error
It doesn't work.
The boiling process
takes a very long
time.
Only a little water
comes out of the
spout when I try to
pour it.
Stains are formed on
the bottom of the
water container.
The electric kettle
doesn't switch off
although the water is
boiling.
Possible cause
Does the plug go into
the socket?
Is the water container
correctly positioned on
the base?
Was the dry-run
protection feature
triggered?
Check whether the
electric kettle has to be
decalcified.
Check whether the
strainer insert in front of
the spout is dirty.
These are calcareous
deposits. They are
innocuous but need to
be removed regularly.
Measure
Insert the plug into the
socket.
Place the water
container correctly on
the base.
See the section on Dry-
run protection
See the chapter on
Decalcification
Clean the strainer
insert.
See the chapter on
Decalcification
- Switch the kettle off
by pressing the on/
Off switch upwards.
-Let the kettle cool
down.
- Check whether the lid
is closed and engaged.
Seite | 25