Electrical Connection; Initial Operation; Operation - Exquisit TA 7101 pbl Mode D'emploi

10.5 Electrical connection

WARNING
Electric shock due to a
faulty connection
The appliance must be switched
off when it is being attaching to
the electricity mains.
The switch must be at 0.
✓ Examine the mains voltage
with the information on the
identification plate.
o You will find the
information for this on
the identification plate
on the appliance.
✓ Connect the appliance only to
a shockproof socket, which
has been installed in
accordance with the
provisions.

11 Initial operation

Clean the appliance with a damp
cloth before first starting it up.
Setting the coffee machine up
• Set the appliance on a level,
stable surface.
• Insert the mains plug into a
socket with safety contacts.
Before brewing coffee for the
first time
• Let it run through the cycle twice
only with clean water and
without paper filters in order to
remove dust that may have
accumulated during production.
• Do not use coffee powders for
this cleaning run under any
circumstances.

12 Operation

To operate the appliance,
proceed as follows:
✓ Open the water tank cover
✓ Based on the desired
number of cups, pour cold
water into the water tank.
You can read the water
level from the scale.
CAUTION
Fill the water tank with water up
to the MAX indication.
Make sure that the filter
✓
holder is inserted.
✓ Bend the lower crease of the
paper filter (size 1x4)
✓ Set the filter into the filter
holder.
✓ Fill the filter with the desired
quantity of coffee powder
✓ Close the filter lid.
✓ Place the pot on the hotplate.
✓ Switch the appliance on. The
control light in the switch will
come on.
IMPORTANT
The brewing process lasts
approx. 8-12 minutes.
Seite | 21