Getting Started; Wearing The Headset; Charging The Battery - Iqua BHS-801 Mode D'emploi

BHS-801_Headset_UG_en_2.fm Page 3 Monday, September 25, 2006 2:20 PM

Getting Started

Wearing the headset

This headset is designed to comfortably fit your ear when
attached to one of the optional earhooks provided in the
sales package. See pictures on page 2 for reference.
1. To attach the earhook, insert the main body of the
headset into the earhook ring and push until it stops.
2. Place the headset in your ear with the microphone
angled at your mouth. Check that the size of the
earhook fits your ear and try another earhook if
necessary.
3. To remove the earhook, gently pull it away from the
headset.

Charging the battery

Before you use the headset, you must charge its battery for approximately 2 hours. Once the
battery is full, it will provide up to 10 hours of talk time and up to 150 hours of standby time.
1. Connect the charger cable to the connector in the headset.
2. Connect the charger into an electric outlet. A red light will turn on.
3. When the battery is fully charged, the red light will turn off.
3
EN