La Boite Concept CUBE Instructions page 46

LOCATION
Wisely select a spot for installing your equipment. Avoid
placing it directly in sunlight or nearby a heat source. No
fire source such as lit candles should be placed on the de-
vice. Also, avoid any sources which could cause vibration,
dust, coolness or moisture. The device can be used at ave-
rage temperatures. The unit must be installed on the two
CUBE legs.
Do not operate the central part without its side bases.
Do not install the equipment in a completely closed
room or in a set of compartments. Do not place the unit
on an unstable surface or on a shelf. Make sure that the
furniture inserts have been correctly fastened. If not, the
unit could fall and injured a child or an adult, and da-
mage the product as well. Due to the distributed magne-
tic fields, nor record player or CRT television set must be
placed nearby the device to avoid possible interference.
POWER SOURCE
The unit should only be used with the type of electric power
source compatible. If you are not sure about the power
source rating in your place, please contact your dealer or the
company responsible for the electric power in your region.
The unit was designed to be left in Stand-by mode when
not in use ; this will allow increasing the amplifier's service
life (this is true for all electrical devices).
45