Publicité
Les langues disponibles
Les langues disponibles
scottyPro must remain dry if water has penetrated into the inside of th e device. In this
case remove batteries immediately and let scotty Pro dry.
scottyPro doesn't like aggressive cleaning agents, dont spare on his srolar module at all -
just wipe off only with a soft, dry rag or with warm water.
Do not short-circuit any contacts at scotty Pro and note the correct polarity while inserting
the batteries in scottyPro.
Technical data
Output voltage
Output current
Solar module power
Life time standard batteries
Utilizable batteries/battery systems
Recommenden ambient temperature
Max. relative humidity
Dimensions (L x B x H)
Weight without batteries
M a n u a l s c o t t y P r o
2 . 5 - 13.0 V
max. 2 amps at 2.4 - 3.0 V and 250 m A at 4 - 6 V
0,55 watts at full sun, 25 °C module temperature
100-1.000 cycles or 1 - 6 years depernding on temperature
NiCd, NiMH, RAM, sizes AA, AAA
Charging internal accu's: 0 ... +40 °C,
Charging external devices: -20 ... +50 "C
(temperature measured in the shade)
90%
100 x 68 x 38 mm
approx. 110g
Page 8
Publicité
