Télécharger Imprimer la page

Solarc scottyPro Mode D'emploi page 18

Chargeur accumulateur solaire

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
The light-emitting diode integrated in the back shows the charge condition of the integrate*rated batteries if
an adapter cable is plugged in. The bigger the on/off ratio the more charge is stored in t f i i the batteries. If
the batteries are flat the LED display goes off and scottyPro is switched off internally.
If - e. g. in winter - there is low sunlight irradiation you can charge the internal batteries 'a s via the
optional mains adapter. For that purpose just connect the adapter to the input jack at therttie back of
scottyPro and attach it to the mains socket overnight. By the way: it works worldwide at ¡fet all power
supply systems (100 to 240 volt voltage). If you attach your device to scotty Pro with the 9ie nains adapter
(in several countries you need an adapter which is not part of scottyPro) at the same tirm iim e you have a
universal power supply unit for all devices which can be operated with scottyPro. Theref9*efore you only
need 1 scotty Pro + mains adapter instead of many different mains adapters!
M a n u a l s c o t t y P r o
Page 4

Publicité

loading