FujiFilm PowerPark Guide D'utilisation page 10

8
WARNINGS
To avoid the risk of a shock hazard:
Do not plug the power cord of the PowerPark dock or PowerPark stand
module into a multiple portable socket outlet (MPSO) or use an extension
cord.
Make sure the AC power cord is disconnected from the PowerPark stand
module whenever the stand is docked.
To avoid the risk of electrical shock and possible fire:
Use only properly grounded equipment. Shock hazards exist if the power
supply is not properly grounded. Grounding reliability can only be achieved
when the equipment is connected to a receptacle marked "Hospital Only,"
"Hospital Grade," or the equivalent. The grounding wire must not be
removed or circumvented.
Use only accessories and peripherals recommended by Fujifilm Sonosite,
including the power supply. Use the PowerPark only within the voltage and
current limits specified on its ratings label.
Inspect the power supply, plugs, cables, and power cords on a regular basis
for damage.
Do not place the PowerPark dock in a wet environment.
To avoid system malfunction and the risk of electrical shock, follow the
PowerPark assembly instructions.
Safety