Maintenance - LG LGG6060 Manuel Du Propriétaire

5. CLEANING AND MAINTENANCE
Burner Caps:
Periodically, enameled pan support, enameled covers, burner heads must be washed with soapy
warm water rinsed and dried. After drying them thoroughly, replace them correctly.
Enamelled Parts:
In order to keep them a new, it is necessary to clean them frequently with mild warm soapy water
and then dry with cloth. Do not wash them while hot and never use abrasive powders or abrasive
cleaning materials. Do not leave vinegar, coffee, milk, salt, water, lemon, or tomato juice to remain
in contact with enameled parts for long periods of time.
Stainless Steel:
Stainless steel parts must be cleaned frequently with mildly warm soapy water and a soft sponge
and then dry with a soft cloth. Do not use abrasive powders or abrasive cleaning metarials. Do not
leave vinegar, coffee, milk, salt, water, lemon or tomato juice to remain in contact with stainless
steel parts long periods of time.

5.2 Maintenance

Other Controls
Periodically check the gas connection pipe. Even if any simple abnormality is felt, inform the
technical service to have it changed. We recommend the gas connection parts to be changed once
a year. If any abnormality is felt while operating the control knobs of cooker, contact to the
authorized service.
Change of Oven Lamp
At first plug the product off from electric supply and make sure
that the product is cool. Remove the bulb after removing the glass
lens. Assemble the new bulb resistant to 300°C to the place of the
bulb that you removed (230 V, 25 Watt, Type E14). Place the glass
lens. Your product will be ready for use after this process.
The lamp design is specific for the use in household cooking
appliances and it is not suitable for household room illumination.
26