Electric Connection And Safety - LG LGG6060 Manuel Du Propriétaire

Cuisinière à gaz
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. INSTALLATION AND PREPARATIONS FOR USE
always use the seals provided in the gas conversion kit. The seals used during connection should
also be approved to be used in gas connections. Do not use plumbing seals for gas connections.
Remember that this appliance is ready to be connected to gas supply in the country for which it has
been produced. The main country of destination is marked on the rear cover of the appliance. If you
need to use it in another country, any of the connections in the figure below can be required. In
such a case, learn the appropriate connection parts and obtain those parts to perform a safe
connection.
Gas Pipe
Seal
Hose
Fitting
Gas Hose
with Collar
It is required to call the authorized service to be able to make the gas connections appropriately
and in compliance with safety standards.
!
CAUTION: Surely do not use any match or lighter for control of gas leakage.
Changing the gas inlet:
For some countries, the gas inlet type can be different for NG/LPG gases. In such a case, remove
the current connection components and nuts (if any) and connect the new gas supply accordingly.
In all conditions, all components used in gas connections should be approved by local and/or
international authorities. In all gas connections, refer to the "Assembly of gas supply and leakage
check" clause explained before.

3.5 Electric connection and safety

During the electric connection, follow the instructions stated in the user manual.
• The earthing cable must be connected to the earth terminal.
• You have to ensure the power cord with suitable insulation to be connected to the power source
during the connection. If there is no appropriate earthed electric outlet in accordance with
regulations in the place where the appliance to be installed, contact to our authorized service.
The earthed electric outlet must be close to the appliance.
• Do not use an extension cord.
• The power cord must not touch to the hot surface of the product.
• In case the cord is damaged, contact Authorized Service to have it changed.
• Any wrong electric connection may damage your appliance, as well as endangering your safety,
rendering your guarantee invalid.
Gas Pipe
Seal
Adapter
Mechanical
Gas Hose
11
Gas Pipe
Seal
Mechanical
Gas Hose
Gas Pipe
Mechanical
Gas Hose
Figure 7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lf68v00s

Table des Matières