Samsung NX58 665 Série Manuel De L'utilisateur page 35

To control the oven remotely
1. Press Smart Control. appears in the display. The oven can now be controlled
remotely using a connected remote device.
2. Select the oven icon in the SmartThings app to open the Oven Control app.
When the app is connected to the oven, you can perform the following
functions through the application:
Oven remote control using the SmartThings app
Oven/ Cooktop •
Monitoring •
Oven Remote Control •
•
My Cooking •
Error Check •
If is not shown in the display, you are still able to monitor the oven and
•
cooktop status and turn the oven off.
NX5000M_NX58M6650WS_AA_DG68-00993A-04_EN+MES+CFR.indb 35
Check the status of the oven
Monitor the on/off status of each cooktop burner.
Set or adjust oven settings remotely.
Turn the oven off remotely.
Once cooking starts, change the set cooking time or
temperature remotely.
Automatically recognize errors.
WI-FI On/Off
If you activate the WI-FI Off mode, mobile devices cannot connect to the range.
1.
01
02 2.
3.
03
NOTE
• Opening the oven door or pressing Smart Control will delete
display and prevent most of the remote functions from operating.
• When oven cooking is finished or cancelled,
• For safety reasons, you cannot turn on the gas oven remotely.
• For safety reasons, you must specify the cooking time to enable remote
control.
• The oven continues operating even if the Wi-Fi connection is lost.
Smart Control will not work properly if the Wi-Fi connection is unstable.
•
• See the SmartThings app manual for detailed information.
Press the Broil pad and 9 on the
number pad simultaneously for 3
seconds.
Press 0 on the number pad to select Off
or On.
Press the START/SET pad to save the
changes.
from the
is removed from the display.
English 35
2018-12-18 6:57:23