Unold NEBULA Notice D'utilisation page 30

Setting the mode
13. When the appliance is switched off press the ON/OFF button twice, the
appliance will run in standard mode. The control panel does not have a
separate indicator light for this.
14. Press the „Mode" button and select the desired operating mode. You can
select Standard mode, Near Natural mode, and Sleep mode. Press the
„Mode" button repeatedly until the desired setting is shown by the approp-
riate indicator light.
ƒ Near Natural mode
Symbol
The appliance works with alternating speeds that feel like the natural
movement of air.
ƒ Sleep mode
Symbol
The appliance works like it does in Near Natural mode with permanently set
speeds that decrease incrementally.
Zeitvorwahl/Timer
15. Via the „Timer" button you can select the desired runtime of the appliance.
This is possible in the range from 0.5 hour to 7.5 hours. Press the „Timer"
button until the desired number of hours appears in the display. After this
time elapses the appliance switches off automatically. If you do not make a
time setting, the appliance will run continuously, however none of the indi-
cator lights for the timer will be illuminated.
Swing function/oscillation
16. Press the „Oscillation (Swing)" button to switch on the swing function.
Press the button again to stop the appliance in the current position, the fan
however keeps running.
Misting function
17. The misting function can be used with or without fan function.
18. Press the button for the misting function once for low misting intensity,
twice for medium misting intensity, and three times for high misting inten-
sity.
19. The appliance now distributes a fine water mist.
20. In the view window on the front of the housing the blue indicator light is illu-
minated, indicating that the misting function is switched on. If the indicator
light is illuminated red, this means that there is no water in the water tank
and the tank must be filled up with water again.
30