Product Contents; Installation Hardware; Replacement Parts; Recommended Installation Tools - activTek INDUCT 2000 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT CONTENTS

UV bulb indicator

INSTALLATION HARDWARE

(8) #8 - .75
1/4" Self-tapping screws
Item # US70679

REPLACEMENT PARTS

INDUCT 750
Ozone free ActivePure® Cell
Item # 9950115
Ozone ActivePure® Cell
Item # US71114
(Not available in California)
INDUCT 2000
Ozone Free ActivePure® Cell
Item # US71088
Ozone ActivePure® Cell
Item # US70678
(Not available in California)

RECOMMENDED INSTALLATION TOOLS

3 1/2" Hole Saw
Drill/Power Driver
for wood or metal
(recommended)
You may also need:
Utility Knife
Replaceable ActivePure®
Cell (includes UV Lamp)
Safety
Switch
(4) #6 - 32 X 2 inch
Threaded bolts
Item #US70680
(2) Thumb Screws
Item #36-00213
ActivePure® Cell
Tin Snips
(for metal ductwork)
(4) Thumb Nuts
Item #36-00214
Mounting Plate
Item # US70683
Phillips
Screwdriver
Dust Mask
Mounting Plate
(4) #6 - 32
Toggle bolt wall anchors
Item # US70682
3/8" Drill Bit
(if installing into fiberglass
ducting with toggle bolts)
CAUTION: When the unit is
installed in a roof mounted
HVAC system, the unit must be
protected from the elements.
Base Unit
1/4
1/4"
Nut Driver Bit
3

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour activTek INDUCT 2000

Ce manuel est également adapté pour:

Induct 750

Table des Matières