Contents Of Reverse Osmosis System; Recommended Tools For Installation - Watts H2O-DWRO300 Manuel D'installation, D'opération Et D'entretien

Contents of the Reverse Osmosis
(RO) System
Please make sure all of the items listed below are contained in the
box. If any of the items are missing please contact retail customer
service at (888) 321-0500 prior to installing.
• Tank
• Module - Carbon Block , Reverse Osmosis Membrane,
Granular Activated Carbon Filters (attached to filter head)
• Part bag - Water line tubing, Drain saddle, Adapt-a-valve
with brass adapters, drain saddle, tank ball valve, mounting
screws and Teflon™ tape
• Faucet with all assembly parts
If any of the items are missing please contact retail customer
service at (888) 321-0500 prior to installing.
Recommended Tools
For Installation
• 1 1/4" Diamond Tipped Hole Saw bit for faucet opening
(Counter Tops/Porcelain & Stainless Sinks)
• 1 1/4" adjustable wrench
• Phillips bit for electric drill
• 1/2" open end wrench
• Needle nose pliers
• 5/8" open end wrench
• Adjustable pliers
• Electric drill
• Sharp knife or tube cutter
• 1/8" diamond tip bit, pilot hole
• Phillips screw driver
• 1/4" drill bit for drain saddle hole
Page 4