Important Safety Instructions - SciCan StatClean Manuel D'utilisation

SAFETY PRECAUTIONS
To prevent fire hazards, please observe the following:
› Do not set unit on soft surfaces (bed, couch etc.) or block the vents on unit. Keep vents free from
any obstructions.
› Observe the other warnings in the previous section.
› If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Use filtered water for best results.
Other observations:
› Do not operate the unit without filling the tank with water. Running dry will damage the
unit.
› Do not plug in the power cord before adding water to the tank. Do not fill the tank above the Max
line to avoid overspill.
› Do not use solution containing abrasive substances or strong corrosive chemical solution not
recommended by the manufacturer or the supplier.
› Operate unit on a dry and flat surface for operation.
› When the unit encounters to severe electromagnetic interference, it may malfunction, stop
operating or lose control functions. If this happens, unplug the power cord then reinsert it to
restart the device.

IMPORTANT SAFETY INSTRUCTIONS:

When using electric appliances, basic precautions should always be followed, including the
following:
› Only use attachments recommended or sold by the manufacturer.
› Do not use outdoors.
› To disconnect, turn all controls to the off position, then remove plug from outlet. Do not unplug by
pulling on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and
before servicing or cleaning.
2