SciCan StatClean Manuel D'utilisation page 10

OPERATION GUIDELINES
6
4
CLEANING
1. Place the lid on the unit.
2. Touch the time button to set the timer to
desired time. Refer to your Instrument Cleaning
Solution's Instructions for Use to determine the
required cleaning time. OPTIM 28 requires a 5
minute cleaning time.
3. Touch the Start/Stop button twice to activate the
cleaning cycle.
4. When cleaning cycle is completed, open the lid
and retrive the cassettes or basket.
If additional cleaning is required reset the timer and
repeat the process above.
5
RETRIEVING INSTRUMENTS
When cleaning cycle is completed, open the lid and
retrieve the cassettes or basket.
Wipe out condensation water from the lid before
placing it on the lid holder.
6
DRAINING TANK
At the end of the day, the tank should be drained, and
cleaned.
1. Connect the hose to the drainage pipe as
shown.
2. Turn the drainage valve handle clockwise to
open the drain and remove the dirty water
3. Clean and wipe the tank dry.
4. Close the drainage valve.