Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Hearing aid compatibility
Note:
For hearing aid compatibility, you must turn off the Bluetooth connectivity.
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The M-value,
shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-
value generally indicates that a device model has a lower RF emissions level, which
may improve the likelihood that the device will operate with certain hearing aids.
Some hearing aids are more immune than others to interference. Please consult your
hearing health professional to determine the M-rating of your hearing aid and whether
your hearing aid will work with this device.
This device is set for direct connection to telecoilequipped hearing aids. When both
the telecoil hearing aid (T switch) and the phone telecoil are activated, using the
device with the aided ear will provide a direct connection for audio through your
hearing aid. The quality of sound depends on the type of hearing aid used. You
should test the device with the telecoil setting activated to determine whether your
audio performance improves.
TTY compatibility
This unit does not support TTY signaling. If you intend to connect a TTY to the unit,
this unit should not be purchased and, if already purchased, it should be returned for
a refund.
FCC ID: WS5DORO410G
IC: 8175A-DORO410GSM
45
Publicité
Chapitres
Table des Matières
