Self-Cleaning Oven - Samsung NX58H5650W Série Mode D'emploi

Masquer les pouces Voir aussi pour NX58H5650W Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SeLf-cLeANiNG oVeN

The self-cleaning oven uses high temperatures (well above cooking temperatures) to
burn off left over grease and residue completely or reduce them to a finely powdered ash
that can be wiped away with a damp cloth.
Failure to follow these precautions could result in damage to the oven, fire, and/or
personal injury.
WARNING
• Do not leave small children unattended near the range during a self-cleaning
cycle. The outside surfaces of the range can get extremely hot.
• Some birds are extremely sensitive to fumes from a self-cleaning oven. Relocate
birds to a well-ventilated room away from the range.
• Do not line the oven, oven racks, or oven bottom with aluminum foil. Doing so
will result in poor heat distribution, produce poor baking results, and cause
permanent damage to the oven interior. The aluminum foil will melt onto and
adhere to the interior oven surfaces.
• Do not force the oven door open during the self cleaning cycle. It will damage
the automatic door-locking system. The door automatically locks when the self-
cleaning cycle is started and stays locked until the cycle is cancelled and the
oven temperature is below 350 °F.
• Be careful opening the oven door after a self-cleaning cycle. The oven will still
be VERY HOT and hot air and steam might escape when the door is opened
Before a self-cleaning cycle
Remove the racks. Leaving the
oven racks in the oven during a
self-cleaning cycle will discolor the
oven racks and make them difficult
to slide in and out of position.
Make sure the door lock feature is
turned off and the oven is cool. If
they are not, the self-cleaning cycle
will not start.
On model NX58H5650W*, make
sure the warming drawer is turned
off. Self-clean will not start when the drawer is on.
Do NOT use the surface burners while the oven is operating in the self clean
mode.
WARNING
A blinking Lock icon indicates the oven door is in the
process of being locked.
When the Lock icon is on, the oven door is locked.
When Loc is shown in the display, it indicates the door
lock feature is on. Press and hold the OFF/CLEAR pad
for 3 seconds to unlock the oven controls.
72_ maintaining your appliance
NX58H5 Series_DG68-00526A-04_EN.indd 72
12/22/2015 11:24:16 AM

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nx58h5600s sérieNx58j5600s série

Table des Matières