Baking - Samsung NX58H5650W Série Mode D'emploi

BAKiNG

The Bake function lets you program the oven to bake at any temperature between 150 °F
(66 °C) and 550 °F (288 °C).
How to set the oven temperature
1. Position the oven rack in the desired location.
2. Press the BAKE pad. The oven will beep every time a
pad is pressed.
The default temperature, 350°, and the Start indicator
will blink on the display. If the default temperature is the
desired cooking temperature, skip to step 4.
3. Press the number pads for the desired cooking
temperature (for example, 3, 7, 5).
The selected cooking temperature and the Start
indicator will blink on the display.
4. Press the START/SET pad.
The oven will automatically light and start preheating.
The display will show a blinking •, along with 150°,
Bake, and the bake element icon, until the oven
reaches 150°. Then, the display will just show the
actual oven temperature.
When the oven reaches the desired baking
temperature, it will beep 6 times.
5. Place the food in the oven and close the oven door.
Preheating is very important for good baking results.
6. When baking is complete, remove the item(s) from the
oven, close the oven door, and press the OFF/CLEAR
pad.
The oven will shut off, and the display will show the
time of day.
to change a programmed baking temperature, press the BAKE pad, enter
the new baking temperature, and then press the START/SET pad. If the oven
temperature is higher than the new setting, the oven will beep 6 times, then show
the new setting. The oven will complete cooking at the new temperature.
36_ operating the oven
NX58H5 Series_DG68-00526A-04_EN.indd 36 12/22/2015 11:23:58 AM