Vertical Panel Connection - Chauvet Professional F4 Manuel D'utilisation

Joining Each F4 (Creating a Modular Design)
Vertical Panel
Connection
14
Use the following instructions to join panels vertically:
1. Line up the alignment conicals at the top of each panel, and the alignment magnets
at the top and bottom of each panel.
2. Push male Speego connections into female Speego connections.
3. Turn the spring knobs clockwise 90°.
4. Turn the tightening latches clockwise 180°, until secure.
Warning! The magnetic attachments are not load-bearing, and are intended for
alignment assistance only. Do not release panel until the hanging hardware has
been fully secured.
F4 User Manual, Rev. 2