Requirements For Installation Location - Eco-King Saga-S 200 Instructions De Montage

3.3.2 Delivery
The product should be transported carefully as
shown, with packaging. Use the handles in the
box. The product is heavy. Take all necessary
precaution to avoid injury while handling the
product, see pt. 3.3.1..
!
Pipe stubs, valves etc. should not be used to
lift the product as this could cause product
malfunctions.

3.4 Requirements for installation location

and positioning
The product should be placed in a room with drain to avoid any material damage in case
!
of leakage. Liability for consequential damage will only apply if this is followed.
!
The product should be placed in a dry and permanently frost-free position.
The product should be placed on a floor suitable for the total weight of the product
!
when in operation. See data plate.
The product must have a clearance for servicing of minimum 40 cm in front of the junc-
!
tion box cover and sufficient space for servicing above the top.
!
The product should be easily accessible in the home for servicing and maintenance.
CAUTION
Min.
40 cm
CAUTION
!
Min. 40 cm
Sufficient
for service
7