Atus LBB 609 Série Mode D'emploi page 8

ENG | 8
Key to symbols (figure 1).
1. Clip attachment (pocket)
2. Numeric display (5-digits)
3. LED Indicator
4. Vibrator (type No. dependent)
5. Alphanumeric display with backlighting (type No. dependent)
6. Icon bar on display (type No. dependent)
7. Battery cover locking screw (Ex versions only)
8. Battery charging contacts
9. User switch (3-position)
10. RESET/RECALL button
Rear/side view (figure 1).
11. Clip attachment
12. Battery cover lock (slide to open)
13. Battery compartment
14. Label placement
15. Battery placement
Icons (figure 1).
(Alphanumeric versions only)
A. Low battery
B. Out-of-range
C. Programming mode
D. Decimal Group call enabled
E. Bleep Off/soft/loud
F. Speech Off/On
G. Telemetry message icon
H. Message number being viewed
J. Message scroll (>24 characters)
WARNING:
When working in potentially explosive atmospheric conditions, every precaution must be taken to
avoid the risk of initiating combustion. Receivers with EEx approval must be in possession of an approved
certificate issued by the certification authorities. Standard receivers must never be used in such conditions.Please
check with your local Atus supplier.To avoid risk strictly adhere to the following:
•
Operating temperature range: -10°C to +40°C
•
DO NOT open battery compartment in a potentially explosive atmosphere
•
Use recommended battery types only
LBB 609x – LBB 619x
P6000 Paging Receivers | Instructions for Use
Atus B.V. | 2013 - 44