Setting The Date And Time; Audio Settings - Esscom FIDELITY 1150 Manuel D'utilisateur

Esscom Fidelity 1150
7.4

Setting the date and time

When you have a subscription to the Caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone's clock will be set automatical-
ly. The year must always be set manually.
To record the date and time stamp to
the recorded message on the
answering machine, the time must be
set.
Enter the menu
Select 'Setting'
Enter setting menu
'Date/Time'
'02/05-06 1226'
Enter the day, month, year and time
(4digits) using the numerical keypad
To confirm
ESC 2 X To leave the menu
7.5 Reset
To bring the telephone in its initial status, you
have to reset the phone.
Enter the menu
Select 'Setting'
Enter setting menu
'Reset'
To confirm.'Sure?' is displayed
All settings will be reset and the
stored information (including the
recorded messages) will be
erased.
8

Audio settings

8.1 Ring tone
Enter the menu
Select 'Audio'
Enter the audio setting menu
'Ring Tone'
4
Confirm
Select the desired ring tone (1-5)
Confirm the ring tone
ESC 2 X To leave the menu
8.2 Ring loudness
Enter the menu
Select 'Audio'
Enter the audio setting menu
'Ring Loudness'
To confirm
Select the desired ring loudness.
To confirm
ESC 2 X To leave the menu
8.3 Key Tone
Enter the menu
Select 'Audio'
Enter the audio setting menu
'Key Tone'
Confirm
Select Keytone-On or -Off
To confirm
ESC 2 X To leave the menu
9 PABX settings
9.1 Dial prefix
When you dial out a telephone number from the
Call list or Phonebook, the programmed prefix will
be added in front of the telephone number. This
function is usefull when you have a PABX where
you have to dial a prefix to take the external line.
Enter the menu
Select 'PABX setting'
Enter the menu
Select 'Dial Pref'
To confirm
Esscom Fidelity 1150