Memory Full; Wall Mounting; Technical Data; Warranty Period - Esscom FIDELITY 1150 Manuel D'utilisateur

14.12 Remote activation
If the answering machine is OFF, the user can
wake-up the device remotely by dialing the
number and wait for 12 rings.
The machine will answer with OGM2.
Enter the remote code and follow the instructions
explained in chapter 14.11.

14.13 Memory Full

There are 2 kinds of Memory Full situations.
1. During Memo/OGM/ICM recording, the memo-
ry is full.
2. The memory is full and somebody is trying to
record a message.
The unit shall play a message indicating the mem-
ory is full.
When OGM 1 was selected, the device will switch
automatically to OGM2 (see chapter 14.2).

15 Wall mounting

Pull out and rotate the wall mounting hook (25).
Put it back in position.
Measure and mark the wall mounting locations
(28).
Drill holes, fit wall plugs and screw in screws.
The cable of the telephone can be fixed in the slot
(30) on the backside of the phone depending on
the telephone connection position.
Mount the telephone on the screws.

16 Technical Data

Dialling options: DTMF (tone)/PULSE
Flash:100/300/600ms
Power adapter: Input 230VAC 50Hz / Output
9VDC 200 mA
Esscom Fidelity 1150
17 Warranty

17.1 Warranty period

The devices have a 36-month warranty period.
The warranty period starts on the day the new unit
is purchased. There is no warranty on standard or
rechargeable batteries (AA/AAA type).
Consumables or defects causing a negligible
effect on operation or value of the equipment are
not covered.
The warranty has to be proven by presentation of
the original or copy of the purchase receipt, on
which the date of purchase and the unit-model are
indicated.

17.2 Warranty handling

A faulty unit needs to be returned to an authorized
service centre including a valid purchase note and
a filled in service card.
If the unit develops a fault during the warranty
period, the service centre will repair any defects
caused by material or manufacturing faults free of
charge, by either repairing or exchanging the
faulty units or parts of the faulty units. In case of
replacement, colour and model can be different
from the original purchased unit.
The initial purchase date shall determine the start
of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by
the service centre.

17.3 Warranty exclusions

Damage or defects caused by incorrect treatment
or operation and damage resulting from use of
non-original parts or accessories are not covered
by the warranty.
The warranty does not cover damage caused by
outside factors, such as lightning, water and fire,
nor any damage caused during transportation.
No warranty can be claimed if the serial number
on the units has been changed, removed or
rendered illegible.
Any warranty claims will be invalid if the unit has
been repaired, altered or modified by the buyer.
Esscom Fidelity 1150
11