Remote Control - Esscom FIDELITY 1150 Manuel D'utilisateur

Esscom Fidelity 1150
14.6 Incoming messages
After the set number of rings the TAD will answer
the call, the caller will hear your outgoing mes-
sage (OGM).If OGM1 is selected, he can record a
message (max 2 minutes) after the beep. As soon
as you have new messages the number of new
messages will be displayed. The recording will be
interrupted when it detect silence for 6 seconds or
when you pick up the handset.
14.7 Memo message recording
To record a Memo message
After you hear a beep, release the
button and start saying your Memo
3SEC
message (max 2 minutes)
To stop the recording
Memo messages will be stored together with the
incoming call recordings.
14.8 Playing recorded messages
In idle mode:
The unit shall play the new
messages
Every time a message is recorded, the date and
time will also be stored if the date and time is set
(see chapter 7.4). When playing back a
message, the date and time of the recording will
be announced before the message.
To pause the playback
<1s To replay the message
2 X To skip to the previous message
To skip to the next message
To stop playback
After all messages have been played, press
re-play all messages.
14.9 Deleting one messages
During playback of the message.
'DELETE?' will be displayed
To confirm and delete the message
If no button is pressed in 30 seconds, the unit
will continue playing the messages
10
14.10 Deleting all messages
During playback of the last message.
'DELETE ALL?' will be displayed
2SEC
To confirm and delete all messages
If no button is pressed in 30 seconds, the unit
will continue playing the messages

14.11 Remote control

The answering machine can be operated remote-
ly using a touch-tone phone (DTMF tone selection
system).
• Call your machine. You will hear the OGM
message.
• After the beep, slowly dial the Security code,
you will hear one short beeps for
confirmation.
• Enter the next codes to use the desired
function.
Replay the message
1
1(1) Play the previous message
2 Play/Pause
3 Play the next message
4 To play the outgoing message
5 To record a new outgoing message
6 Stop playback or recording
Delete playing message
7
8 Answering off
9 Answering on / Toggle OGM1 or
OGM2
0 Delete all, old messages
# Record Memo
If no button is pressed within 10 seconds, the
unit will return to standby mode.
During playback, the unit will stop every 168
seconds. If no button is pressed, the unit will
to
stop and hang up.
When pressing '2' the message playback is
paused for 30 seconds. If no button is pressed
the unit will hang up.
Esscom Fidelity 1150