Klarstein WHISPERWIND Mode D'emploi page 23

Start swing function
Press the SWING button on the fan head. A beep will sound and the fan will begin to
oscillate back and forth. The default angle is 30°. The swing indicator lights up and
the green circle of the digital indicator lights up. Press and hold this button to stop the
oscillation.
Setting the swing angle
Press the SWING button on the fan head. A beep will sound and the fan will begin to
oscillate back and forth. The default angle is 300°. The swing indicator lights up and
the green circle of the digital indicator lights up. Press the SWING button several times
to select one of the following swing angles: 30° > 60° > 90° > 120°. The green circle
of the digital display changes accordingly. Press and hold this key to end the swing
function.
Note: The same setting is made on the remote control.
Setting the timer
Press the TIMER button on the fan head. As soon as the time indicator lights up after the
beep, you can set the off timer. Press the button repeatedly to set the timer between 0
and 12 hours.
• From 0-6 hours, the time can be set in 0.5-hour increments.
• From 6-12 hours, the time can be set in 1-hour increments.
• If you select 0 hours, the timer function is cancelled.
Note: When setting the timer using the remote control, first press the TIMER button
and then use the (+) or (-) buttons to set the desired time. Wait 6 seconds until the set
time is automatically set.
EN
23