Safety Instructions For Installation; Deliverables And Unit Description; Before First Use - Reer VapoDry Notice D'utilisation

Safety instructions for installation

• Remove all packaging and any surplus components before first use to prevent your child being injured or choking.
GB
• Before every use, check the equipment for any obvious damage. If you detect any damage, do not use this e
quipment.
• Check - especially when travelling abroad - that the local mains voltage matches the voltage specified on the units
and/or mains adapters.
• While the equipment is not in use, always pull out the mains plug so that it cannot be switched on unintentionally.
• Secure the power lead and ensure that it cannot be accidentally pulled causing the unit to fall on the floor. Do not
allow the power lead to come into contact with hot surfaces.
• Always use the equipment on a flat, heat-resistant surface.
• Do not submerge the device, its power cord or plug in water or other liquids.
• Before first use, clean the basket and the gripper and run the disinfection process once without any parts for
disinfection in the unit.
• The cleaning and maintenance of the device must not be done by children, unless they are 8 years or older and
are supervised.

Deliverables and unit description

fins for drying function
stainless steel heating
plate
power button
with power LED
power lead
8
cover with steam
outlet
basket for
accessories
steam container
for 8 baby bottles gripper and
(including grip measuring cup
bottles and
wide-neck bottles)
removable filter
operating instructions
1 2
180 ml
water
4 5
Please rinse all parts to be disinfected before starting the process and remove any food residue. Position the
bottles and accessories in such a way that they are not touching the walls or cover.
The disinfection process lasts for about 12 minutes. Thanks to the subsequent 30-minute drying process, the bottles
are ready for use straight away. The steriliser switches off automatically once the disinfection and drying process is
completed. Please wait for several minutes before removing the cover so that the equipment can cool down.

Before first use

3
GB
6
9