Adding Channels To The Channel List; Adding Or Removing A Channel; Changing Channels; Selecting The Picture Mode - Insignia NS-LTDVD19 Guide De L'utilisateur

3 Press VOL+ or ENTER to start scanning for
channels. Your LCD TV/DVD combo
searches for channels that have a signal. Any
channel that has no signal or a poor signal
are not saved. During the search, the
following appears.
Your LCD TV/DVD combo scans for analog
channels, then scans again for digital
channels. When the search is complete the
first channel appears on the screen.

Adding channels to the channel list

You can add channels that were not found in a
previous scan for channels.
For example, if your LCD TV/DVD combo found
channels 1 through 20 and you select the Add
On Ch Search option, your LCD TV/DVD combo
scans for channels starting at 21.
To add channels to the channel list:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Add On Ch
Search.

Adding or removing a channel

You can add or remove a channel to or from the
channel list. If you remove a channel from the
list, your LCD TV/DVD combo skips the channel
when you press the CH buttons. You can still
tune to the channel by pressing the number
buttons.
To manually add or remove a channel:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
8
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Manual Ch
Set.
3 Press ENTER. The following appears.
4 Press CH+ or CH– to select the channel you
want to add or remove, then press ENTER to
add or remove the channel from the list.

Changing channels

To change channels:
• Press CH+ or CH– to go to the next higher or
lower channel in the memorized channel list.
Or, press the number buttons for the channel
you want, then press ENTER.
• Press CH.LIST to display the memorized
channel list, press CH+ or CH– to select the
channel you want, then press ENTER.
• To select a sub-channel, tune to the main
channel, press
button for the sub-channel you want. For
example, to select digital channel 11.1, press
11, press
channel 13.0, press 13, then press
must press
go to digital channel 13.

Selecting the picture mode

To select the picture mode:
• Press PICTURE one or more times to select
the mode you want. You can select
Personal, Standard, Mild, or Fresh.

Viewing channel information

To view channel information:
• Press DISPLAY. Current channel information
appears.

Viewing the digital program guide

If you are in digital TV mode (DTV), you can
view a list of available digital channels.
To view the digital program guide:
1 Press GUIDE. The digital channel list
appears.
2 Press CH+ or CH– to scroll one channel at a
time.
Or, press VOL+ or VOL– to scroll one screen
at a time.
www.insignia-products.com
, then press the number
, then press 1. To select analog
. You
after you press 13, or you will