Wearing Your Headset; Using Your Headset - Logitech Mobile Pro Manuel D'installation

Wearing your Headset

Press the earclip adjuster and slide the
headset over either ear. Rotate the
microphone boom so it is pointing toward
the corner of your mouth. Adjust the
headset until it feels comfortable.

Using your Headset

Turning the headset on and off:
Push and hold the multi-function button for 4 seconds. A blue light will flash when on.
Standby:
When there is no active call, the headset is automatically in power-conserving standby
mode. Your headset will automatically connect when your phone receives a call or if you
place a call.
Answering/ending a call:
Press the multi-function button.
Adjusting headset volume:
To adjust the headset's volume, simply push the "+" button to raise it, or the " - " to lower
it. A tone will sound indicating the change in volume. When the headset is turned OFF, the
current volume level is saved and stored.
Muting a call:
Press and hold Volume up for 2 seconds. A repeating beep will indicate that the
microphone is muted. Quick-Press of Volume up or down to discontinue mute.
Adjusting the mini-boom:
The mini-boom should be stored in its "closed" position with microphone element resting
just above the multi-function button. To adjust, swivel the mini-boom gently and stop
where the microphone element is as close to your mouth as possible. IMPORTANT: DO
NOT FORCE THE MINI-BOOM. IF YOU FEEL IT STOP, DO NOT FORCE IT. FORCING
THE MINI-BOOM PAST THE HARD STOP IN EITHER DIRECTION WILL DAMAGE YOUR
HEADSET.
3
English