General Safety - GMC GM18RS Instructions Originales

Specification
Saw
Model number: GM18RS
Voltage: 18V, DC
Blade stroke speed: 0-3000/min
Saw blade mounting: 1/2" Universal Shank
Stroke length: 25mm
Maximum blade length: 150mm
Wood: 35mm
Cutting Capacity:
Metal: 5mm
Dimensions (L x W x H): 400 x 190 x 90mm
Weight: 2kg (including battery)
Battery
Model: GMC18V40
Cell type: Li-Ion
Voltage: 18V, DC
Capacity: 4Ah
• Batteries supplied will vary depending on pack configuration
Charger
Input power: 230-240V~ 50/60Hz, 80W
Output power: 14.4-18V DC, 3A
Charging time (100%): 80min (4.0Ah), 60min (3.0Ah), 40min (2Ah) & 30min
(1.5Ah)
Compatibility: GMC18V15 (1.5Ah), GMC18V20 (2Ah), GMC18V30 (3Ah) &
GMC18V40 (4Ah)
Cable length: 2m
Ingress protection: IPX0
Protection class:
As part of our ongoing product development, specifications of GMC products may alter without
notice.
*Charging time approximate
Sound and vibration information:
Sound pressure L : 87.33dB(A)
PA
Sound power L : 98.33dB(A)
WA
Uncertainty K: 3dB
Weighted vibration: 21.98m/s
Uncertainty: 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures
are necessary.
2
2
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time
of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop using the
tool immediately and check the ear protection is correctly fitted and provides the correct level of
sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling
and reduced ability to grip. Long-term exposure can lead to a chronic condition. If necessary, limit
the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with
hands below a normal comfortable temperature, as vibration will have a greater effect. Use the
figures provided in the specification relating to vibration to calculate the duration and frequency of
operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or similar
international standards. The figures represent normal use for the tool in normal working conditions.
A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the workplace that may
be useful to domestic users who use tools for long periods of time.

General Safety

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children must be supervised to ensure that they do not play with the
appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
7
GB