Installation Steps; Package Contents - Axis Q1755-E Guide D'installation

AXIS Q1755-E Installation Guide
AXIS Q1755-E Installation Guide
This installation guide provides instructions for installing an AXIS Q1755-E Network Camera on
your network. For all other aspects of using the product, please see the User's Manual, available on
the CD included in this package, or from www.axis.com

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 8.
4. Assign an IP address. See page 12.
5. Set the password. See page 15.

Package contents

Item
Network camera
Terminal block connector
Wall bracket
Tools
Network cable
CD
Printed materials
Optional accessories
Models/variants/notes
AXIS Q1755-E 50Hz/60Hz
2-pin connector for RS-485/422 connection
Wall bracket with internal cable channel
Torx T20 screwdriver
Allen key
Outdoor network cable 5 m (16 ft.) with gasket
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS Q1755-E Installation Guide (this document)
Axis Warranty Document
Extra serial number label (x2)
See www.axis.com for information on available accessories
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5