Appendix F: Ptz Control; Installing A Ptz (Rs-485 Type) Ptz Camera - Lorex L200 Serie Manuel D'instructions

Appendix F: PTZ Control

Appendix F: PTZ Control
One PTZ Camera (not included) can be connected to the PTZ Control Block on the rear panel of the DVR,
and are enabled through the Menu system. Additional PTZ Cameras are available at
http://www.lorexcctv.com

Installing a PTZ (RS-485 Type) PTZ Camera:

1. Connect the Transmit Cable to the 485+ port on the PTZ Control Block.
2. Connect the Receive Cable to the 485- port on the PTZ Control Block.
3. Connect the Camera to BNC Channel 1.
4. Configure PTZ Menu options.
The PTZ Camera Settings will depend on the type of Camera - refer to the specific Camera Manual for
your brand and model of PTZ Camera.
DVR
PTZ CAMERA
(Not Included)
75