Ptz (Pan/Tilt/Zoom) - Lorex L200 Serie Manuel D'instructions

PTZ (PAN/TILT/ZOOM)

This DVR supports a PTZ Camera via the RS485 Serial Interface (see Appendix F for details).
Press the PTZ button in Live Monitoring mode to enter PTZ control mode. PTZ control buttons include:
Button
PTZ
UP
RIGHT
DOWN
LEFT
FF
REW
CH1~8 Select the camera ID for PTZ control. The camera
(Select PTZ camera)
By default, a channel is NOT selected with the PTZ
Button is pressed. Select the channel button that
corresponds to the PTZ Camera Connection and
Setup.
For example, if the PTZ camera is connected to
CH1, select the CH1 button. Press the ▲▼◄►
buttons to control the camera, and press the PTZ
button to exit.
Description
Enter / Exit PTZ mode.
Moves the camera UP.
Moves the camera RIGHT.
Moves the camera DOWN.
Moves the camera LEFT.
ZOOM IN
ZOOM OUT
ID is the same as channel No.
PTZ (PAN/TILT/ZOOM)
CH1
PAN / TILT
100% 07/01/01 01:02:03
41