Honeywell HWM-2000 Guide D'utilisation page 5

035-00360-006_R0 HWM-2000 OM
OPERATION
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• Plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one
way.
H U M I D I T Y C O N T R O L
1. Set the Power Knob to the desired position (Fig. 4).
HIGH: For fast humidifying.
LOW: For more gradual humidification.
NOTE: You will not hear a difference when turning the
humidifier from High to Low.
2. Set the Moisture level to high, by turning the Humidity
Level knob (Humidistat) clockwise
setting of 7.
NOTE: If the humidifier will not start or restart when you
select a power setting, the Humidistat may be set too low.
Turn the knob clockwise
Desired Humidity light will be OFF when the unit is
producing moisture (Fig. 4).
3. Press down and release the Refill & Restart lever to TURN ON the
humidifier.
NOTE: Allow 5-10 minutes for the humidifier to begin producing
moisture.
4/30/04 8:46 AM Page 5
to the highest
to the highest setting. The
Fig. 4
Power
Knob
Humidistat
Knob