Honeywell HWM-950 Serie Guide D'utilisation page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Always UNPLUG the humidifier before filling.
• Remove the Water Tank from the Base and turn it upside
down. Turn the Tank Cap counterclockwise
open. (Fig. 2)
• Fill the Water Tank (Fig. 3) with clean, cool, tap water and
replace the Tank Cap by firmly turning clockwise
Turn the tank upright and check Tank Cap for
leaks. If any water drips from Tank Cap, remove it and
re-tighten.
• Carry Water Tank using one hand on the top handle and
one on the bottom of the Tank.
• Be sure the Removable Water Tray and Cooling Chamber
are in place and the Cooling Chamber Interlock is
engaged.
• Replace the Water Tank on the Base by aligning the Tank
Cap into the Water Tray.
CAUTION: DO NOT ADD ANY MEDICATION OR OTHER
ADDITIVES TO THE WATER. DO NOT POUR ANY WATER
INTO THE OUTLET.
NOTE: WHEN CARRYING THE FILLED WATER TANK PLEASE
USE THE HANDLE AND PLACE YOUR OTHER HAND UNDER
THE TANK FOR ADDITIONAL SUPPORT.
Fig. 1
to
.
Fig. 2
Fig. 3
DH-832
FILLING
Robitussin
Figure 2

Publicité

Table des Matières
loading

Table des Matières