Dati Tecnici - Husqvarna WR 125 2005 Manuel D'utilisation

Table des Matières

Publicité

1-WR CR 125 -2005
19-05-2004

DATI TECNICI

MOTORE
Tipo .........................monocilindrico a 2 tempi
Raffreddamento ................................a liquido
Alesaggio.............................................mm 54
Corsa ................................................mm 54,5
Cilindrata......................................cm
Rapporto di compressione
(a luci chiuse) ..........................................8,8:1
Avviamento ..................................... a pedale
DISTRIBUZIONE
Tipo ...............valvola lamellare in aspirazione
nel basamento e valvola H.T.S.
a comando meccanico
24
15:27
Pagina 24
Type...........................2-stroke single cylinder
Cooling..............................................by liquid
Bore ....................................................2.12 in.
Stroke .................................................2.14 in.
Capacity.........................................7.61 cu.in.
3
124,82
Compression ratio
(with closed ports) ..................................8,8:1
Starting ........................................kick starter
VALVE GEAR
Type...............lamellar valve on suction in the
sullo scarico
ENGINE
MOTEUR
Type..............................un cylindre à 2 temps
Refroidissement.............................par liquide
Alésage................................................mm 54
Course ..............................................mm 54,5
Cylindrée ......................................cm
Rapport volumetrique
(avec orifices fermés)..............................8,8:1
Démarrage ........................................a pédale
DISTRIBUTION
Type ............soupape lamellaire en aspiration
crankcase H.T.S. valve with
mechanical control
on the exhaust
DONNEES TECHNIQUES
124,82
3
dans le soubassement et soupape
H.T.S. à commande mécanique
sur l'échappement

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cr 125 2005Wr 125Cr 125

Table des Matières