Resetting The Filter Display; Deactivating The Filter Display - Thermador T36BT Série Guide D'utilisation

5. Présentez la cartouche filtrante
à l'horizontale et poussez-la
avec le couvercle complètement
dans l'orifice ménagé dans
le panneau de base.
6. Imprimez doucement à la
cartouche filtrante une rotation
de 90-180° dans le sens des
aiguilles d'une montre, jusqu'à
ce que la saillie du couvercle
se retrouve à l'horizontale.
After changing the filter, reset
the filter display.
The appliance might be used
without a water filter.
If you choose this option
replace the water filter
by a water filter substitute
cartridge.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1–800–578–6890.
Resetting the filter
display
If the filter display is not reset,
the next required filter change
cannot be signalled by the
display.
After each filter change:
Simultaneously hold down
the SUPER COOL and ICE
buttons for 3 seconds.
22
Deactivating the filter
display
The appliance might be used
without a water filter.
If you choose this option
replace the water filter
by a water filter substitute
cartridge. In this case the filter
display might be deactivated to
prevent filter change messages.
To purchase a water filter
substitute cartridge contact
your local dealer or call
1–800–578–6890.
m
WARNING
To avoid serious illness or death,
do not deactivate the filter display
while using an water filter.
To deactivate the filter display:
Simultaneously hold down
the SETUP and ICE buttons for
3 seconds.
Re-activate the filter display
by pressing the SETUP and
ICE buttons for 3 seconds
simultaneously.
m