Connecting The Power Cord; Power Outlet - TAD -C2000 Manuel Du Propriétaire

Connecting the power cord

Once all connections have been made, connect the power cord to an AC power outlet (U.S. model: AC 120 V; all other
models: AC 220 V to 240 V).
• Although the power cord to the unit is removable, do not attempt to use a power cord other than
the supplied cord.
• When the power plug is connected to an AC power outlet, the unit's power indicator will light red. When the power switch
is set to ON, power is supplied to the unit.
• When not using the unit for a long period of time (due to travel or other reasons), be sure to unplug the power cord from
the power outlet.
• Always turn the power switch off before unplugging the power cord to the unit.
How to connect the power cord
1. Connect the supplied power cord to the AC IN connector of this unit.
2. Connect to AC outlet (U.S. model: AC 120 V; all other models: AC 220 V to 240 V).
ANALOG OUTPUT
BALANCED
AC IN
Power cord (supplied)

Power outlet

TAD-C2000
15