Measure Installation; Prepare The Installation - Broan-Nutone Rangemaster Rm60000 Série Mode D'emploi

2. MEASURE INSTALLATION

Dimensions for the most common installations are shown below.
Adjust your measurements for various heights of ceilings, soffits, cabinets or
cooktops. For proper operation, the hood must be a minimum of 24" and a
maximum of 30" above the cooktop.
INSTALLATION WITH 12'' SOFFIT OR
OPTIONAL SOFFIT CHIMNEY RMN SERIES

3. PREPARE THE INSTALLATION

Remove the installation kit from inside the hood.
Make sure that the following items are included:
-Wood strip
-Installation manual
-Accessories including:
.Filters (Quantity varies depending on range hood width)
.Bag of parts including:
Screws
Wall anchors (2), Washers 3/16" ID X 3/4" OD (2)
Using a Phillips #2 or a
Robertson #2 screwdriver,
unscrew the hood from the
bottom of crate. Refer to figure
beside to locate all 4 screws.
Discard these screws and
remove hood from wood pallet.
Maximum distance
between the hood and
the cooktop
10-2" flat head (4),Screws
#
Standard 18"
(457 mm) H
(457 mm)
over-cooktop
cabinet
Hood
24"
(610 mm)
Cooktop
INSTALLATION WITH STANDARD 18'' HIGH
OVER-COOKTOP CABINET
8-3/4" (8), Nuts
#
3
1
HR0002
- 6 -
Standard
8 ft. (2.44 m)
ceiling
18"
19"
(483 mm)
Top of wood
mounting strip
RMP Series
Backsplash
(optional)
Minimum distance
between the hood and
the cooktop
Standard 36"
(914 mm)
H cooktop
10-32 (4)
#
4
2
HH0028A