BabyBjorn SYNERGY Manuel Du Propriétaire page 7

4. First adjust the straps for lumbar
support by pullling them downwards
and forwards at a slight angle. These
are the straps with a straight edge.
helpFUl hinT! It is important to
adjust the straps for lumbar support
first to ensure that the lumbar support
is in the correct position for your back.
5. Adjust the straps with a pointed edge.
Pull the straps downwards/forwards at
a slight angle until the baby carrier fits
snugly to your body and all settings
feel comfortable.
6. Starting on one side – slide the side
latch all the way into the side latch
groove on the strap (red to red, blue
to blue) until you hear a click.
helpFUl hinT! Angle the side latch
some, and it will easily slide into the
side latch groove.
7