Rp25 Rope Treatment; Special Projects Team And Customer Support - Spinlock XX Clutch XX0812 Mode D'emploi

RP25 Rope Treatment

RP25 is a surface coating that very effectively protects the critical parts of any line from
abrasion damage.
Independent testing has shown that coating in RP25 impregnates the rope cover and core giving
significant gains in a working life and grip, without reducing the flexibility of the rope.
RP25 treated line is particularly recommended for use with all Spinlock rope holding equipment for
its effectiveness in optimising ultimate load holding performance.
Other areas where coating in RP25 has proved effective include; mast sheaves, footblocks, clutches,
genoa cars, mast exits, lazy jacks, steering cable and furling lines. The RP25 is also ideal for coating
a stripped line to reduce effects of UV degradation.
For further information on RP25 visit www.spinlock.co.uk or contact the Spinlock Special Projects
Team : spt@spinlock.co.uk
38
www.spinlock.co.uk

Special Projects Team and customer support

The Spinlock Special Projects Team is dedicated to provide deck hardware advice and custom solutions
to yacht designers, boat builders, spar manufacturers and high performance racing yacht projects.
The Special Projects Team can provide innovative custom solutions for :
• Mounting plates for clutches and jammers.
• Custom designed aft organisers, carbon or alloy.
• Custom surface finishes for jammers.
• Complete deck solutions for racing syndicates.
• Modifications to standard products for specific applications.
• Load and Rope testing for an optimum specification.
• High performace rope grip surfaces.
Email: spt@spinlock.co.uk
Spinlock Ltd
41 Birmingham Road
Cowes
Isle of Wight
PO31 7BH
United Kingdom
Tel: 44(0)1983 295555
Fax: 44(0)1983 295542
39