emerio FN-121056 Mode D'emploi page 7

4. The assembly of fan blade
Insert fan blade onto shaft ensuring the groove (D) on the back of the fan blade fits over the spacer pin (E)

on the motor shaft.
Tighten blade screw onto shaft. Note: Blade screw should be tightened in anti-clockwise direction.

Blade fastening screw
Fan blade
5. Front grille assembly
Align the front guard with rear guard; push them together.

NOTE: This appliance can also be used with the standing shaft only (without the upper column) or with the
shorter column only as the table fan. Choose your desired column to adjust the height of the appliance.
E
D
- 6 -