Quick Start Guide; Intended Use; Safety Instructions - nedis RDFM4000WT Guide De Démarrage Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
a

Quick start guide

FM Radio
For more information see
the extended manual online:
ned.is/rdfm4000wt

Intended use

The RDFM4000WT is an FM radio with 30 preset
radio stations that can be mounted under a cabinet
to save valuable workspace.
The product is equipped with clock, alarm,
stopwatch and countdown functions.
This product is not intended for use by persons
(including children) with a reduced physical, sensory
or mental capabilities or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the product by a
person responsible for their safety.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
Specifications
Product
Article number
Dimensions (w x
h x d)
Weight
Power input
Rated power
Battery type
Radio bands
FM frequency range
Preset stations
Connections
RDFM4000WT
FM Radio
RDFM4000WT
245 x 48 x 120 mm
544 g
220 - 240 VAC ; 50 Hz
5 W
3 VDC (2 x AA) (not
included)
FM
87.5 - 108 MHz
30
3.5 mm audio input and
output
Main parts (image A)
1
Mounting bracket
2
FM antenna
3
Battery
compartment
4
Stands
5
Mode button
6
Power button
7
Volume wheel
8
Function button
9
Set button
10
LCD display
11
Buzzer mode
indicator
12
Radio mode
indicator

Safety instructions

-
WARNING
Only use the product as described in this manual.
Read the manual carefully before use. Keep the
manual for future reference.
Do not use the product if a part is damaged or
defective. Replace a damaged or defective
product immediately.
Do not drop the product and avoid bumping.
This product may only be serviced by a qualified
technician for maintenance to reduce the risk of
electric shock.
Disconnect the product from the electrical outlet
and other equipment if problems occur.
Do not expose the product to water or moisture.
Disconnect the product from the power source
before service and when replacing parts.
Children should be supervised to ensure that
they do not play with the product.
The power cable cannot be replaced. If the cable
is damaged the product should be scrapped.
Secondary cells and batteries need to be charged
before use. Always use the correct charger and
refer to the manufacturer's instructions or
equipment manual for proper charging
instructions.
5
13
Power cable
14
3.5 mm audio
output
15
3.5 mm audio input
16
Memory down
button
17
Memory up button
18
Tune wheel
19
Alarm button
20
Snooze / sleep
button
21
Assembly template
22
Screws

Publicité

Table des Matières
loading

Table des Matières